4ml Tube Tank & Mega Clearomizer mod

by **kaneohe247** » Sun Jan 08, 2012 1:35 am

4ml Tube Tank & Mega Clearomizer mod

I've replaced the guts of the 4ml tube Tank with a Mega Clearomizer.
Cut a short section of the clearomizer shell to fit thru the bottom of the Tube Tank, and a longer section to fit the top.
Then just stuck the guts of the Clearomizer inside as if it were a syringe mod.
Works great, like a double large Clearomizer, and the plastic shell fits really tight in the Tube Tank!

I also tried it with the steel cartomizer body, but the steel was very slick and would slide easier than the original Tube Tank carto, especially the top part where I'd put a drip tip on, so it was a bit unsatisfactory and could easily slip.
But the Clearomizer works great!

by **131213j312** » Sun Jan 15, 2012 12:04 pm

Wow, great idea.

I'm gonna have to try this.

However, not 100% on where you are cutting the clearomizer.

Any chance you can post some pics for reference?

by **kaneohe247** » Tue Jan 17, 2012 12:01 am

I couldn't get the image to show up in the post. Maybe a mod could fix it?

Here's a link to a picture ( I don't know which one will work ), I hope it's self explanatory.

TT with Clearomizer-a
http://www.flickr.com/photos/sansei247/6713379061/

by **Artist Boy** » Tue Jan 17, 2012 12:29 am

nope cant see the image and the links say I dont have permission to see the image

by **Jagellpuff** » Tue Jan 17, 2012 4:35 am

The pic is set to private, would like to see it.

Jeff "Jagellpuff" via iPhone using Tapatalk

by **kaneohe247** » Tue Jan 17, 2012 1:19 pm

by **Artist Boy** » Tue Jan 17, 2012 1:29 pm

thats cool.

One thing you could do it you notice the tank sliding around on the clearo parts and what not is not remove the middle of the tube, just cut a bunch of holes in the clearos tube. (making sure they are in the right spots of course.)

I can see issues not having the support of the middle of the tube. make it much easier to knock off the threaded end and dump the tank of juice. Just an idea.

by **Grammar Police** » Tue Jan 17, 2012 2:21 pm

Bravo! Thanks for the visuals... It really helps to see pictures. I will give this a try tonight and post my results.

by **kaneohe247** » Tue Jan 17, 2012 2:48 pm

Artist Boy wrote:thats cool.

One thing you could do it you notice the tank sliding around on the clearo parts and what not is not remove the middle of the tube, just cut a bunch of holes in the clearos tube. (making sure they are in the right spots of course.)

I can see issues not having the support of the middle of the tube. make it much easier to knock off the threaded end and dump the tank of juice. Just an idea.

Actually it doesn't slide around on the clearo plastic parts. My experience is that it is firmer at the base than just the standard clearomizer. . . I think its because the bottom of the TT helps to compress the clear plastic around the metal base of the clearomizer And the top doesn't wiggle much at all.
I'm more inclined to be wary of a plain ol' clearomizer wiggling/wobbling and sliding around than this mod. The TT body makes it more solid.

by **kaneohe247** » Tue Jan 17, 2012 2:51 pm

Your welcome Joey.